Moeller Manufacturing - Knee Hinge Washer - 100951S063YH
Genuine OEM Part
Description: Knee Hinge Washer
Part Number: 100951S063YH
Alternate Part Numbers: 100951
Product Overview
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated, and lubricated items.
Item Specification
| Cross-Sectional Shape Style | Rectangular |
| Hole Diameter | 0.150 inches nominal |
| Peripheral Shape Style | Round |
| Center Hole Shape Style | Round |
| Thickness | 0.063 inches nominal |
| Overall Diameter | 0.312 inches nominal |
| Material | Cold Rolled Carbon Steel |
| Material Document and Classification | MIL-S-18729 mil spec single material response overall |
| Surface Treatment | Cadmium overall |
Beechcraft Aircraft Model 35 thru G35 Bonanza Illustrated Parts Catalog [ Click Here ]
- See Page 119, Figure 50, Item -17