MVIQABATT – GE Mentor Visual IQ Two Hour Battery Pack 🔋
Available now on the Airparts.aero Marketplace.
Overview
The GE Inspection Technologies (now Baker Hughes) MVIQABATT is the certified, two-hour lithium-ion battery pack designed specifically for the GE Mentor Visual iQ Video Borescope System. This battery is a mission-critical power source, enabling the borescope unit to operate autonomously in the field, particularly in engine inspection, structural Nondestructive Testing (NDT), and remote maintenance environments where AC power is unavailable or impractical.
The primary engineering requirement for the MVIQABATT is to provide a stable, high-density energy source while meeting strict industrial and environmental safety standards (including UN 38.3 for transport). As a genuine OEM part, it guarantees seamless electronic communication with the Mentor Visual iQ base unit, ensuring accurate runtime reporting, thermal management, and optimal charging cycles, thereby preserving the lifespan of both the battery and the expensive imaging system. The "Two Hour" designation refers to the nominal expected run time under standard operating conditions (e.g., normal screen brightness, intermittent light use).
Key Features
Optimized Lithium-Ion Chemistry: Utilizes high-energy density Li-ion cells engineered for maximum power delivery and extended operational runtime in field environments.
Integrated Smart Battery Management System (BMS): Features an internal electronic circuit board that communicates battery status (State of Charge, State of Health, Temperature) directly to the Mentor Visual iQ base unit.
Quick-Swap Design: Allows the operator to rapidly exchange battery packs in the field with minimal downtime, enhancing inspection efficiency.
Ruggedized Casing: Housed in a durable, impact-resistant casing designed to withstand the typical harsh handling and environments encountered in MRO (Maintenance, Repair, and Overhaul) operations.
Certified Safety Standards: Meets all necessary regulatory requirements for lithium battery safety, including protection against overcharge, over-discharge, short-circuit, and thermal runaway.
Technical Specifications
Part Number: MVIQABATT
Component Type: Lithium-Ion Rechargeable Battery Pack
OEM Manufacturer: GE Inspection Technologies (Now Baker Hughes)
Compatible Equipment: GE Mentor Visual iQ Video Borescope System (All variants)
Nominal Voltage: Typically 10.8 VDC to 14.4 VDC (3 or 4 cell configuration, nominal voltage varies).
Nominal Capacity: Proprietary to GE/Baker Hughes but rated for a nominal 2 hours of continuous runtime.
Battery Chemistry: Lithium-Ion (Li-ion)
Charging Temperature Range: Typically 0 degrees C to 45 degrees C (32 degrees F to 113 degrees F).
Regulatory Compliance: Meets relevant international standards for transport (UN 38.3) and safety (UL/IEC standards).
Aircraft Compatibility
Primary Usage: Used to power the Mentor Visual iQ Borescope for mandatory NDT inspections across all types of aircraft and engines, including:
Turbofan Engines: CFM56, GE90, PW4000, Trent series (Hot Section and Compressor Inspections).
Turboprop and Piston Engines: Routine visual checks for FOD, wear, and cracking.
Airframe Structures: Internal inspection of spars, wing boxes, and corrosion-prone areas.
Verification Note: This is an accessory for ground support equipment (GSE) and is universally compatible with the GE Mentor Visual iQ system, independent of the aircraft type being inspected.
Applications Section
The MVIQABATT battery ensures the borescope system is available for crucial maintenance tasks:
Engine On-Wing Inspection: Provides portable power for immediate borescope inspections in the hangar or on the ramp without requiring generator access.
Remote NDT: Powers the system for inspections of aircraft components in remote repair facilities or military deployment locations.
Maintenance Record Keeping: Ensures the imaging system (which runs on this battery) can reliably capture high-resolution images and video of anomalies for logbook entry and reporting.
Why Choose the MVIQABATT OEM Battery Pack?
The MVIQABATT OEM Battery Pack is the only certified power solution for the sophisticated Mentor Visual iQ system. The core value lies in the integrated Smart BMS communication. Counterfeit or third-party batteries often lack the necessary proprietary communication protocols, leading to: inaccurate runtime display, failure to properly charge or balance cells, and the potential for thermal instability or premature shutdown during critical inspections. Use of the OEM battery ensures optimal charge cycling, maximizing the product life of both the battery and the host borescope unit, thereby protecting a high-value aviation diagnostic asset.
The Li-ion cells within the MVIQABATT operate via the precise movement of lithium ions between the anode (typically graphite) and the cathode (often a layered oxide material) during charge and discharge. The Smart Battery Management System (BMS) is a proprietary electronic circuit that constantly monitors each cell's voltage and temperature. This is essential for cell balancing, ensuring all cells within the pack share the load equally and preventing any single cell from overcharging (which causes degradation) or overheating (which is a severe safety risk). The 10.8 VDC to 14.4 VDC operating range is characteristic of a well-regulated three or four-cell Li-ion series configuration necessary to power the system's high-intensity LED light source and digital imaging processor.
Note: The MVIQABATT is a rechargeable Li-ion battery and must be handled and disposed of according to strict environmental and safety regulations. Only use the charger specified by the Mentor Visual iQ manufacturer to prevent cell damage or fire risk. Do not expose the battery to temperatures outside its specified operating range or high humidity. The battery should be removed from the borescope if the system is stored for extended periods. Inspection and replacement must adhere to the GE Inspection Technologies Instructions for Continued Airworthiness (ICA) for the Mentor Visual iQ system.
Documentation
Authoritative documentation for this accessory component includes:
GE Inspection Technologies (Baker Hughes) Mentor Visual iQ User Manual.
GE Inspection Technologies Instructions for Continued Airworthiness (ICA) for Mentor Visual iQ.
UN 38.3 Transportation Safety Document (available upon request from the OEM).