Military Standard - Internal Tooth Lock Washer - MS35333-43
Standard Part
Description: Internal Tooth Lock Washer
Part Number: MS35333-43
Alternate Part Numbers: AU29AR271, 12387269-43, 4198000-21, 0717612, 1824HX1, ASM2 B18.21.1, AN936A716, 6E7, 5310PL0820170, 5310006853228, FF-W-100
Product Overview:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces.
Item Specification:
| Hole Diameter | 0.448 inches minimum and 0.464 inches maximum | |
| Outside Diameter | 0.740 inches minimum and 0.789 inches maximum | |
| Material Thickness | 0.032 inches minimum and 0.040 inches maximum | |
| End Item Identification | W/s:truck, heavy expanded mobility tactical (hemtt); M1A2 abrams tank, 2350-01-328-5964 (eaa CMBT85PK3); missile, advanced medium range air-to-air (AMRAAM)/AIM120A; support equipment, B-1 aircraft; aircraft, C-18A, EC-18B; helicopter landing system, lamps mk iii; smoke generator set, M157A2; radar set, AN/PPS-5B; armored security vehicle, model XM1117; tactical air opns module (AN/TYQ-(23)); mrap - m-atv | |
| Hardness Rating | 40.0 rockwell C minimum and 50.0 rockwell C maximum | |
| Material | Steel comp 1060 or steel comp 1070 or steel comp 1078 or steel comp 1080 overall | |
| Material Document and Classification | 66 fed std all material responses overall | |
| Surface Treatment | Cadmium and chromate overall | |
| Surface Treatment Document and Classification | QQ-P-416, ty 2, cl 3 fed spec single treatment response overall | |
| Style Designator | Flat internal teeth | |
| Nondefinitive Spec/STD Data | 1 type and a grade and 1 style and 1 composition |
Fits In:
- · Bombardier Challenger 604
- · Bombardier Challenger 605
- · Textron Aviation Cessna 650 Citation III-IV-VI-VII
- · Textron Aviation Cessna 750 Citation X
- · Textron Aviation Hawker 800XP-850XP