Lock External Tooth Washer - MS35335-33
Standard Part
Description: Lock External Tooth Washer
Part Number: MS35335-33
Alternate Part Numbers: AN936B416, SH1114-05, 114604, AN936-B416, 193-8, 121753, 453475, 1114-00, 0076574, 76574, 402350207, 1114-00, 1114-13, 70178-33, MS35335-19, 0740794, 853-1013, 10351369, 853074, 373-5042-00, 373-5042-000, 69103, 104-3S416B
Product Overview
A washer is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces.
Provide efficient locking by means of the spring tension and biting action of tapered twisted teeth. MS35333 and MS35335 supersede AN936A and AN936B washers respectively.
Item Specification
| Hole Diameter | 0.256 inches minimum and 0.267 inches maximum | |
| Outside Diameter | 0.494 inches minimum and 0.510 inches maximum | |
| Material Thickness | 0.023 inches minimum and 0.028 inches maximum | |
| End Item Identification | W/s:aircraft, (AC-130H, MC-130H, EC-130E, HC-130); compressor, reciprocating M4; airborne mobile dir air spt ctl (2ID), (02M JUL83)(AN/UYQ-3A); aviation engine test systems (aets); support equipment, B-1 aircraft; central message switch, AN/TYC-39A; boile; medium mine protected vehicle - mmpv; armored multi-purpose vehicle (ampv); A4 bradley fighting vehicle; A3 bradley fighting vehicle | |
| Hardness Rating | 40.0 rockwell C minimum and 50.0 rockwell C maximum | |
| Material | Steel comp 1050 or steel comp 1551 or steel comp 1552 or steel comp 1053 or steel comp 1055 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064 overall | |
| Material Document and Classification | 66 fed std all material responses overall | |
| Surface Treatment | Cadmium and chromate overall | |
| Surface Treatment Document and Classification | QQ-P-416, ty 2, cl 3 fed spec single treatment response overall | |
| Style Designator | Flat external teeth |
Fits in
- Bombardier Challenger 601
- Bombardier Learjet 60 - all variants
- Dassault Falcon 7X
- Textron Aviation Beechcraft King Air 100 - all variants
- Textron Aviation Beechcraft King Air 200 - all variants
- Textron Aviation Beechcraft King Air 90 - all variants
- Textron Aviation Cessna 560 Citation V-Ultra-Encore-Excel-XLS
- Textron Aviation Cessna 650 Citation III-IV-VI-VII