Continental Aerospace Technologies - WASHER - AN960-616L
Genuine OEM Parts
Description: Washer
Part Number: AN960-616L
Alternate Part Number: NAS1149F0632P
Product Overview:
A washer has a centrally located hole with a solid laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinches (0.8 micrometers). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4 mm) or greater, The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated, and lubricated items.
Features and Specifications
| Center Hole Shape | : | Round |
| Cross-Sectional Shape | : | Rectangular |
| Hole Diameter | : | Between 0.380 inches and 0.400 inches |
| Material | : | Steel |
| Material Specification | : | Mil-s-7952 military specification single material response or qq-s-698 federal specification single material response |
| Overall Diameter | : | Between 0.620 inches and 0.645 inches |
| Edge Shape | : | Round |
| Surface Treatment | : | Cadmium |
| Surface Treatment Specification | : | Cl 3 federal specification single treatment response type 2 qq-p-416 |
| Thickness | : | Between 0.022 inches and 0.042 inches |
Between AirParts' branded hardware products, and our Seller's hardware offerings, we have hundreds of thousands of hardware parts in stock.